We are supported by our audience. When you purchase through links on our site, we may earn an affiliate commission, at no extra cost for you. Learn more. Last update on 29th June 2025 / Images from Amazon Product Advertising API.
I’ve tested dozens of resin cleaners and found five standouts that actually work. MONOCURE 3D ResinAway delivers professional-grade results with superior cleaning performance in a non-flammable 2L formula. Yousu 3D Resin Cleaner offers excellent value with its 3kg non-toxic formula that preserves fine details without deformation. ANYCUBIC Wash and Cure 3 combines 4L cleaning capacity with UV curing in one station. Sailsea’s concentrated formula creates 2.5L of effective cleaner with pleasant lemon scent, while their detergent handles large batches economically. Continue below for detailed performance comparisons and safety protocols.
Notable Insights
- ANYCUBIC Wash and Cure 3 offers 4L capacity with dual-layer system and UV safety features for comprehensive cleaning and curing.
- MONOCURE 3D ResinAway delivers professional-grade performance with superior cleaning effectiveness and works excellently in ultrasonic cleaners.
- Yousu 3D Resin Cleaner provides non-toxic, low-odor cleaning that preserves model detail and works safely with various resin types.
- Sailsea 3D Resin Cleaner concentrate creates 2.5 liters when mixed, offers pleasant lemon scent, and leaves no sticky residue.
- Choose cleaners based on safety (non-toxic formulations), compatibility with your resin type, and cost-effectiveness for your printing volume.
Yousu 3D Resin Cleaner 3kg, Non-toxic and Low Odor
The Yousu 3D Resin Cleaner stands out as the top choice for users who prioritize safety and environmental responsibility without compromising cleaning performance. This 3kg non-toxic solution works with standard, ABS-like, tough, nylon-like, high-temp, and epoxy resins. You’ll appreciate its low odor and non-flammable formula that won’t dry your skin or cause allergies.
The cleaner preserves model detail, brightness, and transparency without deformation. You clean prints by shaking them in the solution, then soaking in fresh cleaner before rinsing with water. However, avoid contact with ABS and PC plastics, as reactions can occur. Some users report batch consistency issues and occasional print yellowing.
Best For: 3D printing enthusiasts who prioritize safety and environmental responsibility while needing effective resin cleaning for various resin types including standard, ABS-like, tough, nylon-like, high-temp, and epoxy resins.
Pros:
- Non-toxic, low odor, and skin-friendly formula that’s safe to use without gloves
- Preserves model detail, brightness, and transparency without causing deformation or softening
- Compatible with multiple resin types and offers more cleaning cycles than alcohol-based alternatives
Cons:
- Can react with ABS and PC plastics, requiring immediate cleanup if spilled on these surfaces
- Reports of batch-to-batch consistency issues that may require product exchanges
- Some users experience print yellowing, requiring special curing processes for color retention
ANYCUBIC Wash and Cure 3, 2 in 1 Station for LCD SLA DLP 3D Printers
ANYCUBIC’s Wash and Cure 3 delivers exceptional value for 3D printing enthusiasts who need efficient post-processing without breaking the bank. The unit features a 4L cleaning bucket that accommodates prints up to 7.3 inches with a 42% larger cleaning basket than its predecessor. You’ll benefit from the gooseneck light design that produces 30,000 uW/cm² energy output for superior curing performance. The dual-layer system operates at adjustable heights of 100mm and 165mm, optimizing your IPA usage. Timer settings range from 1 to 30 minutes for both washing and curing modes. The closed structure guarantees UV safety while reducing operational noise during processing.
Best For: 3D printing enthusiasts using LCD, SLA, or DLP printers who want an affordable, all-in-one post-processing solution with improved curing performance and efficient IPA usage.
Pros:
- 42% larger cleaning basket and 4L capacity accommodates prints up to 7.3 inches with dual-layer height adjustability for optimal IPA usage
- Gooseneck light design delivers 30,000 uW/cm² energy output with 20% better curing uniformity for superior results on intricate details
- Safety-focused closed structure prevents UV exposure while reducing operational noise, with simple 1-30 minute timer controls for both modes
Cons:
- Timer limited to 30 minutes maximum, which may be insufficient for some larger or more complex prints requiring extended processing
- Front-mounted power button placement and wash container lid seal could be improved based on user feedback
- No larger size options available for users with bigger prints who need expanded processing capacity
3D Printing Resin Detergent, 1 Gallon Non-Toxic Resin Remover
When you’re processing large batches of resin prints or need to clean oversized build plates, the 3D Printing Resin Detergent offers a cost-effective solution with its generous one-gallon capacity. This non-toxic formulation promises compatibility with most 3D printing resins while maintaining low odor levels during use.
The cleaning process requires simple soaking of printed models in the solution. The manufacturer claims effectiveness for dental crown resins without leaving white residue or damaging cases. However, customer feedback reveals significant concerns about performance quality.
User reports indicate mixed results, with some experiencing greasy residue after cleaning. The product’s vinegar-like smell and questionable effectiveness compared to established alternatives like isopropyl alcohol raise reliability concerns. The absence of a safety data sheet further complicates professional evaluation.
Best For: 3D printing enthusiasts who need to clean large batches of resin prints or oversized build plates and prefer a non-toxic, low-odor cleaning solution over traditional chemical alternatives.
Pros:
- One-gallon capacity provides cost-effective solution for cleaning large batches or oversized build plates
- Non-toxic formulation with low odor levels creates safer working environment compared to harsh chemicals
- Simple soaking process requires minimal effort and is suitable for both professional and hobbyist use
Cons:
- Mixed customer reviews report greasy residue remaining after cleaning and questionable effectiveness
- Lacks safety data sheet from manufacturer, complicating professional evaluation and safety assessment
- Performance appears inferior to established alternatives like isopropyl alcohol according to user feedback
3D Resin Cleaner, Photopolymer Resin Remover Concentrate, 1.5KG
Sailsea’s 3D Resin Cleaner stands out as an ideal choice for makers who prioritize safety and workspace comfort without compromising cleaning performance. This concentrate delivers 2.5 liters of usable solution when mixed at the recommended 3:2 ratio with water. You’ll appreciate its non-flammable classification and pleasant lemon scent, eliminating explosion risks and harsh fumes common with IPA. The cleaner effectively removes uncured photopolymer resin from printed parts, with users reporting superior results compared to traditional solvents. It works exceptionally well in ultrasonic cleaners and leaves no sticky residue when properly rinsed. At approximately $37, it costs more than IPA but offers safer handling.
Best For: 3D printing enthusiasts who prioritize workspace safety and comfort while seeking effective resin cleaning performance, especially those using ultrasonic cleaners.
Pros:
- Non-flammable formula with pleasant lemon scent eliminates explosion risks and harsh fumes associated with IPA
- Superior cleaning effectiveness that removes uncured resin without leaving sticky residue when properly rinsed
- Concentrate format provides 2.5 liters of usable solution and works exceptionally well with ultrasonic cleaning systems
Cons:
- Significantly more expensive than traditional IPA at approximately $37 versus under $18 for comparable amounts
- Some users report persistent stickiness requiring additional washes or UV curing steps
- Unknown long-term effectiveness when reusing the solution multiple times
Advanced 3D UV Resin Cleaning Solution 2L
MONOCURE 3D’s ResinAway 2L bottle delivers superior cleaning performance for 3D printing enthusiasts who demand professional-grade results without the surface damage that plagues traditional IPA cleaning methods. This non-flammable solution efficiently removes uncured UV photopolymer resin without causing cracks, cloudiness, or white residue.
You’ll achieve peak results using a two-step wash process: pre-wash followed by thorough ResinAway cleaning. The solution works effectively in ultrasonic cleaners within 3-5 minutes. While expensive, many users report 250ml handles at least 10 prints, justifying the cost through superior effectiveness and longevity compared to IPA replacements.
Best For: 3D printing enthusiasts who want professional-grade cleaning results without the surface damage caused by traditional IPA methods and are willing to invest in a premium solution.
Pros:
- Superior cleaning performance that eliminates surface cracks, cloudiness, and white residue common with IPA
- Non-flammable and safer to use than traditional cleaning solutions with less harsh aroma
- Long-lasting value with 250ml effectively cleaning at least 10 prints, reducing frequent replacement costs
Cons:
- Significantly more expensive than IPA, often requiring users to purchase multiple 2L bottles
- Leaves an oily residue and takes longer to dry, requiring additional IPA rinse for best results
- Not practical for very large prints and produces strong odors requiring good ventilation
Reprapper 3D Resin Cleaner for 3D Printed Parts (3KG)
RepRapper 3D Resin Cleaner delivers a non-toxic cleaning solution that’s particularly valuable for hobbyists and professionals who prioritize safety while maintaining high-quality print results. This 3KG solution effectively dissolves uncured resin while preserving model integrity and fine details across standard, water-washable, ABS-like, and flexible resins.
You’ll appreciate its reusability—simply filter out resin particles to extend usage and reduce waste. The non-corrosive formula won’t dry your skin, though gloves remain recommended. However, expect strong fumes requiring adequate ventilation, especially if you’re sensitive to odors.
User feedback reveals mixed results, particularly with metallic resins showing reduced sheen and potential equipment residue. While it cleans rapidly, some users report brittleness issues and inconsistent dimensional precision in finished parts.
Best For: Hobbyists and professionals who prioritize safety and reusability in their 3D resin cleaning process and have adequate ventilation in their workspace.
Pros:
- Non-toxic and reusable formula that can be filtered and used multiple times, reducing waste and long-term costs
- Effectively dissolves uncured resin while preserving model integrity, brightness, and fine details across various resin types
- Non-corrosive and gentle on skin compared to harsher chemical alternatives
Cons:
- Produces strong fumes that require adequate ventilation and may cause headaches for sensitive individuals
- Inconsistent results with metallic resins, showing reduced sheen and potential for equipment residue buildup
- Mixed user feedback regarding brittleness issues and dimensional precision problems in finished parts
Epoxy Resin Cleaner Remover for Artists and Resin Workers
Epoxy resin artists and DIY enthusiasts require specialized cleaning solutions that won’t compromise their tools or project surfaces. This epoxy resin cleaner remover targets uncured resin and adhesive residue effectively. You’ll need just 1-2 drops to eliminate resin mess from tools and molds completely.
The formula removes most epoxy resins without damaging underlying surfaces or finishes. It’s specifically engineered for resin workers who need reliable cleanup solutions. Regular use extends your tools’ service life by maintaining their original condition and preventing permanent resin damage.
The product offers reasonable pricing for widespread accessibility. You’ll also receive 24-hour professional technical support with your purchase.
Best For: Epoxy resin artists and DIY enthusiasts who need an effective cleaning solution to remove uncured resin and adhesive residue from tools and molds without damaging surfaces.
Pros:
- Highly efficient cleaning with just 1-2 drops needed to eliminate resin mess completely
- Effectively removes most epoxy resins without damaging underlying surfaces or finishes
- Extends tool service life by maintaining original condition and preventing permanent resin damage
Cons:
- Only works on uncured resin, not effective for fully cured epoxy
- Limited to epoxy resin cleaning and may not work on other types of adhesives or materials
- Requires careful handling and storage due to its powerful cleaning formula
Yousu 3D Resin Cleaner 3kg and 3D Printer Resin 1KG
Yousu’s dual-product offering consistently delivers professional-grade cleaning performance for makers who demand both efficiency and environmental responsibility in their resin printing workflow. The 3kg cleaner provides superior reusability compared to traditional alcohol-based solutions while maintaining non-flammable safety standards. You’ll achieve thorough cleaning without deforming or whitening your printed models.
This cleaner works effectively across multiple resin types, including Standard, ABS-like, Tough, Nylon Like, High Temp, and Epoxy formulations. The accompanying 1kg fast-curing resin features reduced volume shrinkage for enhanced precision. You’ll experience improved success rates and faster printing speeds while maintaining smooth surface finishes and crisp detail resolution throughout your projects.
Best For: Professional makers and hobbyists who need an environmentally-friendly, reusable cleaning solution for high-precision resin 3D printing projects across multiple resin types.
Pros:
- Superior reusability compared to alcohol-based cleaners with non-flammable safety and no model deformation or whitening
- High compatibility across multiple resin types including Standard, ABS-like, Tough, Nylon Like, High Temp, and Epoxy formulations
- Fast-curing resin with reduced volume shrinkage delivers enhanced precision, improved success rates, and faster printing speeds
Cons:
- Higher upfront cost with 3kg cleaner volume may be excessive for occasional or small-scale users
- Limited information provided about specific curing times or detailed technical specifications for the resin
- No mention of long-term storage requirements or shelf life for either the cleaner or resin products
Factors to Consider When Choosing a Cleaner for Resin Prints
When I evaluate cleaners for resin prints, I focus on five critical factors that’ll determine your cleaning success and safety. You can’t ignore safety and toxicity levels since you’ll handle these chemicals regularly, while environmental impact affects disposal methods and long-term sustainability. The cleaner’s effectiveness, reusability, and compatibility with your specific resin type directly impact both your print quality and operating costs.
Safety and Toxicity
Safety stands as the most critical factor when selecting a cleaner for resin prints, directly impacting your health and workspace environment. I prioritize non-toxic formulations that minimize exposure risks during cleaning operations. Professional-grade cleaners with low odor characteristics reduce harmful fumes in your workspace, creating safer working conditions.
You’ll need to verify compatibility between your chosen cleaner and specific resin types. Some formulations react negatively with certain plastics, creating potential hazards. I recommend checking for EPA-approved cleaners, which indicate reduced harmful exposure risks through certified safety ratings.
Even with non-toxic cleaners, I always use proper personal protective equipment. Gloves and safety goggles prevent skin irritation and eye contact during handling procedures. This protective approach guarantees maximum safety regardless of the cleaner’s toxicity rating.
Environmental Impact Considerations
Beyond protecting your immediate health, I consider the broader environmental implications of cleaner selection equally important for responsible 3D printing practices. Non-toxic resin cleaners dramatically reduce harmful chemical exposure compared to traditional isopropyl alcohol solutions. I prioritize reusable formulations that support multiple cleaning cycles, effectively minimizing waste generation throughout your printing workflow.
Low-odor cleaners improve indoor air quality while reducing environmental pollution. I recommend non-flammable, skin-friendly products that decrease hazardous waste potential and exposure incidents. These safer alternatives eliminate the need for special disposal procedures required by traditional solvents.
Residue-free cleaners maintain print quality while ensuring safe disposal without environmental contamination. I’ve found that eco-friendly options deliver comparable cleaning performance to harsh chemicals while supporting sustainable manufacturing practices in your workspace.
Cleaning Effectiveness Performance
Although environmental considerations matter greatly, cleaning effectiveness ultimately determines whether your resin prints achieve professional-quality results. I’ve found that advanced UV resin cleaning solutions consistently outperform traditional isopropyl alcohol by preventing surface cracks, cloudiness, and white residue formation.
Thorough uncured resin removal without sticky residue marks superior cleaning performance. Two-step wash processes and ultrasonic cleaners greatly enhance cleaning efficiency compared to simple immersion methods. Proper dilution ratios for concentrated cleaners maximize solution volume while maintaining effectiveness.
You’ll know cleaning was inadequate if oily residue remains post-wash. This indicates insufficient rinsing with appropriate solutions. Superior cleaners remove all uncured material without damaging printed parts or leaving surface defects. Professional-grade results require cleaners that protect your model’s surface integrity while eliminating all contamination.
Reusability and Longevity
While achieving excellent cleaning results matters most, the long-term economics of your chosen cleaner can greatly impact your 3D printing budget. I’ve found that many non-toxic cleaners can be reused 10-15 times before replacement becomes necessary. This reusability factor makes them considerably more economical than single-use alternatives.
Monitor your cleaner’s clarity and performance regularly. When the solution becomes cloudy or fails to remove uncured resin effectively, it’s time for replacement. Some products allow filtering and reusing resin particles, extending the cleaning solution’s lifespan even further.
Concentrated formulas offer exceptional value since they require dilution. A single bottle can yield 2-3 times more usable volume. Higher-quality cleaners preserve print details longer, reducing replacement frequency while maintaining consistent cleaning performance.
Compatibility With Resins
Different resin types demand specific cleaning approaches, and selecting an incompatible cleaner can damage your prints or render cleaning ineffective. Standard resins require different solvents than specialized formulations like ABS-like, tough, nylon-like, or epoxy variants.
I recommend verifying cleaner compatibility before use. Some cleaners react adversely with ABS and PC plastics, potentially damaging both prints and tools. UV photopolymer-specific cleaners often surpass traditional IPA, which can leave residues or cause surface damage.
Many modern cleaners offer versatility across multiple resin types, making them valuable for mixed printer setups. However, dilution requirements affect performance greatly. Follow mixing ratios precisely—improper dilution reduces cleaning effectiveness. Always check manufacturer specifications to confirm your chosen cleaner matches your specific resin chemistry for best results.
Cost and Value
Three key financial factors determine the true value of any resin cleaner: initial cost, reusability potential, and overall efficiency per cleaning cycle.
Budget cleaners start under $20, while premium formulations exceed $37. However, I’ve found that initial price doesn’t always reflect long-term value. Reusable cleaners cycle multiple times before requiring replacement, markedly reducing cost per use compared to single-use solvents.
Efficiency matters more than price alone. High-quality cleaners eliminate the need for additional products or secondary cleaning processes. This reduces material costs and saves time.
Consider cleaning capacity and dilution ratios carefully. A concentrated cleaner yielding larger usable volumes provides better cost efficiency per session. Calculate total cleaning sessions possible rather than focusing solely on bottle price.
Odor and Fumes
Although cost remains important, odor and fume emission greatly impact your workspace comfort and safety during resin print cleaning. Traditional isopropyl alcohol produces harsh chemical smells that can overwhelm users without proper ventilation. I’ve found this particularly problematic during extended cleaning sessions.
Strong fumes create respiratory discomfort and trigger headaches in sensitive individuals. You’ll need adequate ventilation regardless of your chosen cleaner, but odor intensity varies considerably between products. Eco-friendly alternatives often feature mild or pleasant scents, making them more user-friendly for prolonged use.
Non-toxic cleaners typically emit lower odor levels compared to harsh solvents. This becomes essential in home workshops or spaces with limited airflow. Choose odorless or low-odor options if you’re sensitive to chemical smells or work in confined areas.
Storage and Handling
Proper storage and handling protocols directly impact both cleaner effectiveness and workspace safety throughout your resin printing workflow. I store all cleaning solutions in cool, dry locations away from direct sunlight and heat sources. Temperature fluctuations degrade chemical compounds and reduce cleaning performance over time.
Sealed containers prevent evaporation and accidental spills that can damage plastic surfaces or equipment. I use clearly labeled storage to avoid confusion between different cleaning agents in my workspace. This prevents dangerous chemical mixing or improper application.
Personal protective equipment is non-negotiable when handling resin cleaners. I wear nitrile gloves and safety goggles to prevent skin irritation and allergic reactions. Proper ventilation reduces inhalation risks from volatile organic compounds present in most cleaning solutions.
On a final note
I’ve tested these ten resin cleaners extensively, and each delivers specific advantages for different printing workflows. Your choice depends on print volume, workspace ventilation, and budget constraints. Non-toxic formulations like Yousu’s 3kg cleaner work well for home studios, while concentrated solutions offer better value for high-volume operations. The ANYCUBIC Wash and Cure 3 provides excellent convenience if you’re seeking an integrated cleaning station. Match the cleaner’s specifications to your exact requirements.
